NEC Univerge NEAX 2000 IPS Command Manual page 123

COMMAND CODE TITLE:
08
BASIC SERVICE FEATURE
161 Transfer a trunk line placed in Consultation Hold
(Hold Transfer)
162 Multiple Radio Paging access after accessing a Radio Paging
trunk with delay type Radio Paging
NOTE:
This is ineffective when CM08>157: 0.
163 Step Call for an incoming call from a Tie Line
165 Replay timer for Attendant Delay Announcement
168 When the DTMF station or D
ting of Speed Calling-Station (Station Speed Dialing)
171 When the DTMF station or D
ting of Speed Calling-Station (Station Speed Dialing)
172 Automatic Idle Return on D
176 1000-Slot Memory Block number "2" for Speed Calling-Sta-
tion (Station Speed Dialing) is used as the Memory Block for
Speed Calling-System (System Speed Dialing)
177 Last Number Call (Last Number Redial)
178 Last Number Call (Last Number Redial) /Stack Dial for internal
calls
NOTE: Effective only when CM08>177: 0.
179 Ringing cadence on Direct in Termination
[Other than North America]
Ringing cadence on Direct in Termination
[North America Only]
BASIC SERVICE FEATURES
term
station dials "#" during set-
term
station dials "*" during set-
term
0 Available (Hold Transfer)
1 Not available (Consultation Hold)
0 Not available
1 Available
0 Not available
1 Available
0 Replay at an interval
1 Replay only once
0 "#" is set as paused data (1.5 seconds)
1 "#" is set as dialed digit
0 "*" is set as programmable pause by
CM41 Y=0>38
1 "*" is set as dialed digit
0 Not available
1 Available
0 Available
1 Not available
0 Available
1 Not available
0 Not available (Only available for
external calls)
1 Available
0 As per CM35 Y=33
1 Special Ringing
0 As per CM35 Y=33
1 0.4 seconds ON-0.2 seconds OFF
-0.4 seconds ON-2 seconds OFF
– 99 –
: Initial Data
SETTING DATA
See CM41 Y=0>47
See CM20>A068
See CM20>A069
See CM08>397
Continued on next page
NWA-008844-001 Rev.5.0
91ch3001.fm
JUNE/01/2007
CM08