NEC Univerge NEAX 2000 IPS Command Manual page 198

COMMAND CODE TITLE:
0B
Y
No. MEANING
10 Port number of Device
Handler Manager (DHM)
Self port
[Series 3200 R6.2
(R6.2)]
LAN DATA ASSIGNMENT
1ST DATA
DATA MEANING
70 Port number of
DHM Self port
which is used
for the commu-
nication
between main
site and remote
site
NOTE 1: 128 ports from Base Port number you set are assigned as DHM Self
ports. 4 ports are used for the communication with one remote site.
The DHM Self port number that is used for the communication with each
remote site can be calculated as follows.
The value of second data + 4 × (site number-1)
NOTE 2:
Since the DHM Self port number 0-1023 is reserved for specific applica-
tions (Well-Known port), the DHM Self port number 0-1023 cannot be
used.
DATA
01024
65534
NONE
– 174 –
INITIAL
: Initial Data
2ND DATA
MEANING
DHM Self port number 1024
DHM Self port number 65534
DHM Self port number 3300
Continued on next page
NWA-008844-001 Rev.5.0
JULY/01/2006
CM0B
91ch3001.fm