NEC Univerge NEAX 2000 IPS Command Manual page 394

COMMAND CODE TITLE:
35
Y
No. MEANING
208 Release of ISDN trunk when
receiving the ISDN DIS-
CONNECT message with
Progress Description=08
from ISDN (effective for an
incoming call from ISDN)
[Series 3200 R6.2 (R6.2)]
NOTE: When sending the in-band tone to the called station from ISDN, set the second data to 0.
In this case, the ISDN trunk will be released automatically in 30 seconds after the called station receives
the in-band tone or when the called station goes on-hook.
220 ETSI ISDN Connected Line
Identification Presentation
(COLP) for a call terminat-
ing office
[For EU]
[Series 3300]
NOTE: When providing ETSI ISDN COLP, assign the connected line number for COLP as follows.
Connected line number: Local office code (CM50 Y=05) + ISDN Subscriber Number (CM12 Y=12)
221 Receiving connected line
number from call terminat-
ing office in ETSI ISDN
Connected Line Identifica-
tion Presentation (COLP) for
a call originating office
[For EU]
[Series 3300]
222 International Prefix Code for
ETSI ISDN Addressing
[For EU]
[Series 3300]
223 National Prefix Code for
ETSI ISDN Addressing
[For EU]
[Series 3300]
TRUNK ROUTE DATA
DATA
0 Not released
1 To release
0 To provide
1 Not provided
0 Available
1 Not available
X Prefix Code
X: 0-9, A (*), B (#)
XXXX
NONE No data
X National Prefix Code
X: 0-9, A (*), B (#)
XXXX
NONE No data
SETTING DATA
MEANING
– 370 –
CM35
: Initial Data
RELATED
COMMAND
CM12 Y=153, 154
CM35 Y=221
CM08>629
CM12 Y=153, 154
CM35 Y=220
CM08>629
Continued on next page
NWA-008844-001 Rev.5.0
91ch3003.fm
NOVEMBER/15/2006