[Cmd030] Message Assignment - NEC Univerge NEAX 2000 IPS Command Manual

COMMAND CODE TITLE:
D030
FUNCTION:
This command is used to assign the Hotel Names (Company Names) of messages to be printed at the
end of the billing information. The number of characters that can be assigned is 20 characters per line
and the total of 60 characters (3 lines).
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
ST + DE
+ D030
DATA TABLE:
1ST DATA
Character print position: 0-63
Print
Position 0 - - - - - - 19
X - - - - - - X (1st line)
20 - - - - - 39
X - - - - - - X (2nd line)
40 - - - - - 59
X - - - - - - X (3rd line)
MESSAGE ASSIGNMENT
1ST DATA
+ DE
+
(1-2 digits)
Character Assignment
See the table on next page.
• For setting space instead of
printing a character, assign
data "20".
• At the end of a Hotel Name
or a message, enter "CR"
(Data=0DH) and End Mark
(Data=00H) in the order named.
+ 2ND DATA + EXE
2ND DATA
– 847 –
CMD030
REMARKS
Continued on next page
NWA-008844-001 Rev.5.0
91ch3009.fm