NEC Univerge NEAX 2000 IPS Command Manual page 241

COMMAND CODE TITLE:
12
Y
No. MEANING
07 Service Restriction Class C
11 Kind of idle status of called
station on DID MFC call
12 Calling Party Number
displayed on called side
NOTE 1: As the second data, assign the Indial number informed when a call is originated from the station.
For a station for which no Indial number is informed, assign NONE.
NOTE 2: When the system accommodates both ISDN and SIP trunks, the subscriber number assigned by this com-
mand is used for ISDN. Assign a subscriber number with CM12 Y=46 for SIP.
13 ISDN/SIP Local Office
Code Table
NOTE 1: When the system accommodates both ISDN and SIP trunks, the Local Office Code Table assigned by
this command is used for ISDN. Assign a Local Office Code Table with CM12 Y=47 for SIP.
16 Trunk to be seized as
Private Line on per station
basis
NOTE: When assigning Private Line on a per station basis, Outgoing Trunk Queuing (Trunk
Queuing- Outgoing) and Timed Queue features are not available.
To restrict Outgoing Trunk Queuing, set the second data "0" by CM35 Y=28. Also to
restrict Timed Queue, set the second data "0" by CM15 Y=25.
STATION CLASS-1
DATA
00 Service Restriction Class C (00-15)
NOTE:
15
0 Called station idle (No Charge)
1 Called station control (Charge)
2 Called station idle (Charge)
3 Called station idle (Charge)
X ISDN/SIP subscriber number (ISDN/SIP Indial
No.)/Station number (ANI/Enhanced-911)
XXXXXXXX
NONE No data
00 ISDN/SIP Local Office Code Table number 00
14 ISDN/SIP Local Office Code Table number 14
15 No data
D000 Trunk number
D255
NONE No data
SETTING DATA
MEANING
The features available in each Class are
programmed in CM15.
– 217 –
CM12
: Initial Data
RELATED
COMMAND
CM15
CM12 Y=46
CM12 Y=47
CM50 Y=05
CM35 Y=18
CM42>09
CM35 Y=28
CM15 Y=25
Continued on next page
NWA-008844-001 Rev.5.0
91ch3002.fm
NOVEMBER/15/2006