NEC Univerge NEAX 2000 IPS Command Manual page 778

COMMAND CODE TITLE:
EA
U : Error detail
0001H : (ERR_ETHERNET) Kasago TCP/IP initialization error: TCP
0002H : (ERR_INTERFACE) Kasago TCP/IP interface error: Not used
0003H : (ERR_MALLOC) No empty area of memory: Service initialization
0004H : (ERR_ALREADYOPEN) Already opened: OPEN
0005H : (ERR_NOACCEPT) Nonconnection (TCP only): Transmission request
0006H : (ERR_NOOPEN) Nonopening: Transmission request
0007H : (ERR_NODATA) Type error: ACK_NACK
0008H : (ERR_CHANNELFULL) No empty physical port: Not used
0009H : (ERR_BADSERIAL) Serial number error (physical port number that is representative
Listen Specification Open Serial number: excluding 0 or FFFFH): TCP_OPEN
0010H : (ERR_BADSOCKET) Connected Socket descriptor was not able to be received by the
response of Accept: ACK_NACK
0011H : (ERR_NULLPTR) Pertinent service is unregistered
0012H : (ERR_BADPTR) Serial number error (It is larger than physical port number that phys-
ical port number of Serial number allocated)
0013H : (ERR_USED) FTP/Flash-ROM has already been processing it: FTP's SEND
0081H : (TM_EPERM) Operation not permitted
0082H : (TM_ENOENT) No such file or directory
0085H : (TM_EIO) Input/output error
0086H : (TM_ENXIO) Device not configured
0089H : (TM_EBADF) Bad file descriptor
008CH : (TM_ENOMEM) Cannot allocate memory
008DH : (TM_EACCES) Permission denied
008EH : (TM_EFAULT) Bad address
0096H : (TM_EINVAL) Invalid argument
0098H : (TM_EMFILE) Too many open files
00A3H : (TM_EWOULDBLOCK) Operation would block
(TM_EAGAIN) Resource temporarily unavailable
00A4H : (TM_EINPROGRESS) Operation now in progress
00A5H : (TM_EALREADY) Operation already in progress
00A8H : (TM_EMSGSIZE) Message too long
00A9H : (TM_EPROTOTYPE) Protocol wrong type for socket
00AAH: (TM_ENOPROTOOPT) Protocol not available
FAULT INFORMATION STORE/DISPLAY FUNCTIONS
– 754 –
CMEA
Continued on next page
NWA-008844-001 Rev.5.0
91ch3008.fm
DECEMBER/02/2005