NEC Univerge NEAX 2000 IPS Command Manual page 562

COMMAND CODE TITLE:
76
Y
No. MEANING
37 Distinctive LED
indication on
term
D for DID
incoming call with
no CLI
[Series 3600]
NOTE: This command is effective on the following conditions.
• CM35 Y=32 is set to 1.
• CM76 Y=34, 36 is set to 0 or 2, and D
38 Interval of
ringing tone for
DID incoming call
with no CLI
[Series 3600]
NOTE 1:
Assign this command when the terminal destination is SLT or D
NOTE 2: This command is effective when CM76 Y=34, 36 is set to 0 or 2.
NOTE 3:
For SLT, Internal Ringing is applied. For D
[For Australia/Asia/Africa/Europe/Latin America/Middle East/Russia]
ON-0.25 seconds OFF-0.25 seconds ON-0.25 seconds OFF
DIGIT CONVERSION ON DID CALL
1ST DATA
DATA
000-999:
Number Conver-
sion Block No.
assigned by
CM76 Y=00/90
000-999:
Number
Conversion
Block No.
assigned by
CM76 Y=00/90
2ND DATA
MEANING
0 Green (120 IPM)
1 Red (120 IPM)
term
receives the incoming call.
NOTE3
0 Ringing
1 Special Ringing
2 Internal Ringing
3 As per CM76 Y=22
[Other than North America]
0 0.5 seconds ON-0.5 seconds OFF
term
(D )
1 second ON-2 seconds OFF (SLT)
1 0.5 seconds ON-0.5 seconds OFF
-0.5 seconds ON-1.5 seconds OFF
term
(D )
0.4 seconds ON-0.2 seconds OFF
-0.4 seconds ON-2 seconds OFF
(SLT)
2 1 second ON-2 second OFF
term
(D or SLT)
3 As per CM76 Y=22
[North America Only]
term
, Special Ringing; 0.5 seconds ON-0.5 seconds OFF
[For EU]
– 538 –
: Initial Data
REMARKS
CM35 Y=32
CM76 Y=34,
36
CM08>397
See CM08>397 CM76 Y=22,
34, 36
See CM08>397
See CM08>397
term
.
or 0.25 seconds
is applied.
Continued on next page
NWA-008844-001 Rev.5.0
NOVEMBER/15/2006
CM76
91ch3005.fm