NEC Univerge NEAX 2000 IPS Command Manual page 298

COMMAND CODE TITLE:
18
DATA TABLE:
(1) Station Hunting-Terminal
Y
No. MEANING
0 Station numbers
included in Station
Hunting group
1 Kind of station
numbers included in
Station Hunting group
STATION HUNTING GROUP
STATION NUMBER (A)
DATA
X Station number (A)
XXXXXXXX
When assigning station numbers to a Station Hunting group, only two station numbers
can be assigned per operation. By repeating the operation as often as required, all the sta-
tion numbers to be included in a Station Hunting Group can be assigned. The two station
numbers to be assigned with one operation are defined as Station Number (A) and Station
Number (B).
Example: When you define a Station Hunting-Terminal group using Station Numbers
300, 301, and 302, designate 300 as the pilot station number, and perform the
following two operations:
Station No. (A)
1st Operation
2nd Operation
As seen above, one station can be either Station Number (A) or Station Number (B). Sta-
tion Number (A)/(B) is used to identify which of the two station numbers is to be
assigned first.
X Station number
XXXXXXXX
MEANING DATA
XXXXXXXX
NONE
Station No. (B)
300 301
301 302
– 274 –
: Initial Data
SETTING DATA
MEANING
X Station number (B)
No data
0 Member station of Station
Hunting-Terminal
1 Pilot station of Station
Hunting-Terminal
Continued on next page
NWA-008844-001 Rev.5.0
CM18
91ch3002.fm