NEC Univerge NEAX 2000 IPS Command Manual page 713

COMMAND CODE TITLE:
BA
Y
No. MEANING
86 Identity header of SIP
Trunk
[Series 3600]
88 Session Timer setting
[Series 3600]
90 Timer of response
waiting for calling
(INVITE transaction
time-out timer)
[Series 3600]
NOTE 1: Set the timer until the response is received from the communicated terminal/office for a calling. If
the time-out occurs, the system regards it as the network fault occurrence, and executes the alter-
native routing by fault occurrence (only when the alternative routing feature is provided to the sys-
tem).
NOTE 2:
Do not set the second data to 30 (60 seconds), when the system provides the alternative routing
feature.
NOTE 3:
Set the second data to the value that does not exceed the value of ORT timer assigned by CM41
Y=0>104, when providing the tandem route with the alternative routing feature.
91 Provisional response
code when the system
receives the incoming
call, and starts to call
the stations
[Series 3600]
H.323/SIP PROFILE DATA
1ST DATA
DATA MEANING
00 Profile number
for control packet
31
00 Profile number
for control packet
31
2ND DATA
DATA
0 P-Asserted-Identity
1 P-Preferred-Identity
1 1 second
4294967294 4294967294 seconds
NONE 1800 seconds
00 No Time-out
01 1 second
30 60 seconds
(2 seconds incre-
ments)
31 32 seconds
0 183 Session Progress
(with SDP)
1 180 Ringing (without
SDP)
7 180 Ringing (with
SDP)
– 689 –
: Initial Data
RELATED
COMMAND
MEANING
CMA7 Y=71
CMA7 Y=71
CMBA
Y=29, 56, 83
CMA7 Y=71
CMA7 Y=71
Continued on next page
NWA-008844-001 Rev.5.0
NOVEMBER/15/2006
CMBA
91ch3007.fm