NEC Univerge NEAX 2000 IPS Command Manual page 701

COMMAND CODE TITLE:
BA
Y
No. MEANING
25 Query a DNS server to
get the IP Address
[Series 3600]
NOTE 1: When the second data is set to "0", only the IP Address replied from to a DNS server is used. When
the second data is set to "1", the SIP server IP Address assigned by CMBA Y=30 is used.
NOTE 2: The second data should be set to "1" for IP trunk Point-to-Multipoint connection when the second
data of CMA7 Y=46 is set to 0.
29 Session Timer
refresher kind
[Series 3600]
30 Gate Keeper/SIP server
IP Address
IPT INITIAL
NOTE 1:
The second data follows the IP Address pattern assigned by CM8A Y=5XXX>167 for IP trunk
Point-to-Multipoint connection when the second data of CMA7 Y=46 is set to 0.
NOTE 2: When SIP Trunk Source IP Address Check is provided by CM0A Y=79: 0, SIP initial is required
after setting this command.
31 Gate Keeper/SIP server
Port number
IPT INITIAL
SIP INITIAL
NOTE:
The port number of SIP server is 05060 in general.
H.323/SIP PROFILE DATA
1ST DATA
DATA MEANING
00 Profile number
for control packet
31
00 Profile number
for control packet
31
00 Profile number
for control packet
31
2ND DATA
DATA
0 Provide
1 Not provided
0 uas
1 uac
aaabbb Gate Keeper/SIP
cccddd server IP Address
aaa : 000-255
bbb: 000-255
ccc : 000-255
ddd: 000-255
NONE No data
00000 Gate Keeper/SIP
server Port number
65534
NONE No data
– 677 –
: Initial Data
RELATED
COMMAND
MEANING
CMA7 Y=71
CMBA Y=30
CMA7 Y=71
CMBA Y=56,
83, 88
CM0A Y=79
CMA7 Y=71
CMA7 Y=71
Continued on next page
NWA-008844-001 Rev.5.0
CMBA
91ch3007.fm
JUNE/01/2007