NEC Univerge NEAX 2000 IPS Command Manual page 268

COMMAND CODE TITLE:
14
1ST DATA
DATA MEANING
XX ZZZ XX : FP/Virtual AP No.
(00-63)
ZZZ: AP/Virtual PIM
Port No. (000-127)
STATION NUMBER, TRUNK NUMBER, CARD NUMBER FOR EACH FP
DATA
E900
E963
2ND DATA
MEANING
Card number of External Key Interface
(PN-DK00)
NOTE 1: The card number (E900-E963)
should be assigned to the FP No. 00-
03 as follows.
For FP No. 00: E900-E915
For FP No. 01: E916-E931
For FP No. 02: E932-E947
For FP No. 03: E948-E963
NOTE 2: Do not assign the card number to
the other FP No. than above.
NOTE 3: Circuit No. 3 of E963 is used for
built-in External Key Interface of
MP card by setting CM61.
[Series 3200 R6.2 (R6.2)]
– 244 –
CM14
RELATED
COMMAND
CM61
Continued on next page
NWA-008844-001 Rev.5.0
91ch3002.fm
JULY/01/2006