NEC Univerge NEAX 2000 IPS Command Manual page 804

COMMAND CODE TITLE:
F8
Y
No. MEANING
5 MP/AP Program
Revision Read
Do the following operation to read out of the program version.
Example: When reading out the program version of IP-PAD
Operation
ST
F85 + DE
D001 + DE
S
S
S
S
NOTE 1:
The ID code informed from the Registration Server is automatically registered from MAT-
WorX. [North America Only]
NOTE 2: The Special ID Code can be entered when the System ID code is not available due to trouble
with the Registration Server. The Special ID code is effective for 5 days (7200 minutes). If the
exact ID code is not entered within 5 days as the Special ID Code, you will be restricted for
MAT/CAT operation.
SERIAL No./ID CODE/PROGRAM REVISION READ
1ST DATA
DATA
XX01 XX XX
D0-DF: LAN Interface No. 00-15
XX02
E0-EF : LAN Interface No.16-31
FD
XX03
FE
XX04
FF
XX05
XX
01-05 : Operating procedure
Display
COMMAND=
F85>
F85>D001: 4353 (Start Code [Fixed Code])
F85>D002: 3353 (SC Number of Program Name)
F85>D003: A1
F85>D004: 0001 (Official Revision [Integral number])
F85>D005: 00
[North America Only]
MEANING
of IP-PAD/SIP card
of IP-PAD/SIP card
: Upgraded side of MP
card
[Series 3500]
: Outdated side of MP card
[Series 3500]
: ACT program of MP
card
: AP No. (04-15, 20-31)
(Official Version)
(Official Revision [Decimal point below])
– 780 –
2ND DATA
DATA MEANING
4353 Start Code (Fixed Code)
XXXX SC Number of Program
Name
XX Official Version
XXXX Official Revision
(Integral number)
XX Official Revision
(Decimal point below)
NWA-008844-001 Rev.5.0
CMF8
91ch3008.fm
JULY/01/2006