NEC Univerge NEAX 2000 IPS Command Manual page 45

ERROR MESSAGE
WRONG
SEE CMxx YYYY
USE CMxxxx
TRK NOT ASSIGNED
xx>xxx: ERROR
Error Messages
MEANING OF MESSAGE
The data stored in the memory is
wrong. This message is displayed
when too many digits are entered.
For example, when assigning "123"
for a service access code when "12"
has been already used for another
service access code.
Double assigned error of the same
station number or trunk number.
The data is already assigned by
another command.
The designated trunk is not assigned. Assign the trunk by CM10/CM14.
The first data has been changed by
"S" or " " button, but the station cor-
–
responding to that first data is not
assigned.
CHAPTER 1 HOW TO USE CAT
Clear the present data by entering
"CCC", or enter the correct data.
The station number or trunk number
intended is already assigned to first
data YYYY of CMxx. Confirm.
The command code and YY number
already assigned are displayed. Con-
firm.
Change the first data by "S" or "
button, or reenter the first data by
"CE".
– 21 –
ERROR MESSAGES
ACTION
"
–
NWA-008844-001 Rev.5.0
91ch1001.fm