NEC Univerge NEAX 2000 IPS Command Manual page 144

COMMAND CODE TITLE:
08
BASIC SERVICE FEATURE
475 Sender Tone sending on DOD MFC call/Enhanced 911
477 Selection of Backward signal for ANI signal on DOD MFC call
NOTE:
The setting data of CM08>477 and 487 must be same.
[Not used in Australia/North America]
478 Supervision of receiving timing for Backward signal on DOD
MFC call (for Pulse Form signal)
[Not used in Australia/North America]
479 Kind of MFC Signaling
[Chinese No. 1]
487 Selection of Backward signal for ANI signal on DID MFC call
NOTE: The setting data of CM08>477 and 487 must be same.
[Not used in North America]
489 Type of Single Data Message Frame Format when using the
PN-4RSTC-A card
[Series 3500]
493 CID Call Back
BASIC SERVICE FEATURES
0
1
0
1
INITIAL
0
1
INITIAL
0
1
0
1
INITIAL
0
1
CIR INITIAL
0
1
– 120 –
: Initial Data
SETTING DATA
Not sent (No tone)
To send
Backward GC
Backward GA
Not available
Available
Chinese No. 1
Other than Chinese No. 1
Backward GC
Backward GA
Without Time Parameter
With Time Parameter
To provide
Not provided
Continued on next page
NWA-008844-001 Rev.5.0
CM08
91ch3001.fm
JUNE/01/2007