[Cm9B] Event Occurrence Notice Button Assignment - NEC Univerge NEAX 2000 IPS Command Manual

COMMAND CODE TITLE:
9B
FUNCTION:
This command is used to provide the event occurrence notice button. When the offices with CCIS via
Virtual IPT connection are disconnected due to a fault occurrence, the link down can be notified to the
term term
D s/D IPs that are connected to the offices. Also the main site and remote site are disconnected
due to a fault occurrence, the link down can be notified to the D
both site.
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
+ DE
ST + 9BY
DATA TABLE:
Y
No. MEANING
0 Link down notice
for CCIS/Remote
PIM over IP to the
Event Occurrence
Notice button
EVENT OCCURRENCE NOTICE BUTTON ASSIGNMENT
EVENT OCCURRENCE NOTICE
BUTTON NUMBER
+
+
LINK DOWN NOTICE FOR
CCIS/Remote PIM over IP
(4 digits)
1ST DATA
DATA MEANING
XX ZZ XX: 01-36: Event
Occurrence
Notice Button
No.
ZZ : 00: Link down
notice for CCIS
01-30: Remote
Site No. to be
notified
31: Link down
notice for SIP
[Series 3600]
term
s/D
+ DE +
SETTING DATA
DATA MEANING
0 To notify
1 Not notified
– 611 –
term
IPs that are connected to the
DATA
+ EXE
(1 digit)
RELATED
COMMAND
CM90 Y=00:
F1364-F1399
NWA-008844-001 Rev.5.0
NOVEMBER/15/2006
CM9B
91ch3006.fm