NEC Univerge NEAX 2000 IPS Command Manual page 390

COMMAND CODE TITLE:
35
Y
No. MEANING
156 Calling Name Display for
incoming call from ISDN/
T1-ANI/MFC-R2 route
158 Release of ISDN trunk when
receiving the ISDN DIS-
CONNECT message with
Progress Description=08
from ISDN (effective for an
outgoing call to ISDN)
[Series 3200 R6.2 (R6.2)]
NOTE: When sending the in-band tone to the calling station from ISDN, set the second data to 1.
In this case, the ISDN trunk will be released automatically in 30 seconds after the calling station re-
ceives the in-band tone or when the calling station goes on-hook.
159 8/32-Party Conference trunk
161 DS code point (DiffServ
code point) for IP trunk/SIP
trunk voice packet
NOTE 1: Set this data when the router provides DiffServ QoS, if required.
DiffServ: Differentiated Services; one type of QoS.
QoS: Quality of Service
NOTE 2: When this data is set, the TOS field Precedence set by CM35 Y=134 is ineffective.
If you want to validate the Precedence set by CM35 Y=134, set "CCC" (data clear) for CM35 Y=161.
NOTE 3: This data setting is required only for Point-to-Multipoint connection.
163 Echo canceller setting for IP
trunk/SIP trunk
NOTE: Set this data when setting the echo canceller to each trunk route basis.
To set the echo canceller for each opposite office respectively in Point-to-Multipoint connection, use
CM8A Y=5000-5255>170.
TRUNK ROUTE DATA
DATA
0 1000-Slot Memory Block No. 3
1 1000-Slot Memory Block No. 2, 3
[Series 3700 R12.2]
3 Not provided
0 To release
1 Not released
0 To provide
1 Not provided
00-3F DS code point
NONE No data
0 Echo canceller OFF
1 Echo canceller ON
SETTING DATA
MEANING
– 366 –
CM35
: Initial Data
RELATED
COMMAND
CM15 Y=136
CM05
CM07
CM35 Y=134
CM41 Y=2>38
CMA7 Y=50
CM8A Y=5000-
5255>170
Continued on next page
NWA-008844-001 Rev.5.0
91ch3003.fm
JUNE/01/2007