NEC Univerge NEAX 2000 IPS Command Manual page 227

COMMAND CODE TITLE:
10
NOTE 1:
In Slot 08-11, the following 8-port or 16-port line/trunk circuit cards are not mountable.
PN-8COT, PN-8DLC, PN-8LC, PN-4DAT, PN-CFTB, PN-2CSI, PN-4CSI
When the above line/trunk cards are mounted in Slot LT01/AP01-LT07/AP07, only applica-
tion processor cards (not including PN-2ILCC) are mountable in Slot LT08/AP08-LT11/
AP11.
NOTE 2: PN-4CSI is mountable in the even number slots (Slot 00, 02, 04, 06). When PN-4CSI is mount-
ed, only application processor cards are mountable in the adjoining right side slots (Slot 01,
03, 05, 07).
STATION NUMBER, TRUNK NUMBER, CARD NUMBER
– 203 –
CM10
NWA-008844-001 Rev.5.0
91ch3002.fm
NOVEMBER/15/2006