NEC Univerge NEAX 2000 IPS Command Manual page 133

COMMAND CODE TITLE:
08
BASIC SERVICE FEATURE: 301-398
BASIC SERVICE FEATURE
301 When system is initialized
311 Display last calling station number
Display calling station number when a calling station abandons
a call before the call is answered
[Series 3400]
319 On a Tie Line outgoing call with answer signal, transferring/
holding the call before distant called station answers.
NOTE: Effective only when CM35 Y=00 is 03 or 04 and CM35
Y=04 is 02.
322 Answering method of Camp-On (Call Waiting Method)
324 Direct-In Termination-Outside
In the case of no release signal on incoming trunk and both
answer and release signals on outgoing trunk
331 Sender Prepause for outgoing call via attendant
333 Mail box number sent to VMS when VMS is recalled after
transferring the call to an unanswered station
334 Call to station set with a Return Message Schedule
Display, receives ringing
335 Station number and name display when incoming call begins
ringing in
BASIC SERVICE FEATURES
0 D
1 D
0 6 seconds
1 Until next call
0 Not available
1 Available
0 Not available
1 Available
0 Same as Camp-On transfer-method
(Switch Hook Flash + Call Hold
access code/Answer key)
1 Alternating between two calls by
Switch Hook Flash/Answer key
0 Allowed
1 Restricted
0 To provide
1 Not provided
0 To send
1 Not sent
0 Available (Ringing)
1 Not available (ROT connection)
0 Display when incoming call termi-
nates to the Prime Line
1 Display when incoming call termi-
INITIAL
nates to the Prime Line or My Line
– 109 –
: Initial Data
SETTING DATA
term
MIC lamp ON
term
MIC lamp OFF
Continued on next page
NWA-008844-001 Rev.5.0
CM08
91ch3001.fm
JULY/01/2006