Using External Fiber Optic Transceivers; Figure 59. Total-Acextreme Interface To External Mcair Transceiver - DDC Total-AceXtreme MIL-STD-1553 Design Manual

Figure 59. Total-AceXtreme Interface to External McAir Transceiver

8.2

Using External Fiber Optic Transceivers

As an alternative to using the internal transceivers and transformers, it is possible to
use Total-AceXtreme® with external (electrical) MIL-STD-1553 transceivers, or with
fiber optic transceivers. Figure 60 illustrates the interface between Total-AceXtreme
and a pair of external fiber optic transceivers. Note for this interface, it is necessary to
configure the Total-AceXtreme's Manchester decoders to accept a single-ended
input signal. This is done by connecting the nSINGEND to logic '0'.
Data Device Corporation
www.ddc-web.com
M I L - S T D - 1 5 5 3 T R A N S C E I V E R O P T I O N S
102
DS-BU-67301B-G
1/14