Table of Contents
Advertisement
SITE OVERVIEW AND PLANNING
Public Side
Pedestrian gate
Make sure a separate
walk-through entrance is
available and its pedestrian
path is clearly designated.
Wind Load Factors
Design gate panels to
accommodate for wind loads.
Earth Ground
Be sure to place the
WARNING
WARNING signs on both
sides of the gate. For your records, take a
Attach WARNING Signs
Duty cycle:
Power:
Motor
DC Batteries
Gate time to open/close:
Gate weight:
25
| www.hysecurity.com
Figure 2. Site Planning and Overview
Table 1. SwingSmart Specifications
SwingSmartDC 20
continuous
Single Phase Switch selectable
115 volts, 3 amps, 50/60 Hertz
230 volts, 1.5 amps, 50/60 Hertz
½ hp
Two 8Ah (50Ah optional)
Approximately 10 to 15 seconds
Variable speed, open/close
separately
1,300lbs @ 12ft leaf
(590kg @ 4m leaf)
SWINGSMART DC PROGRAMMING AND OPERATIONS MANUAL
INSTALLATION
Keypad or Card Reader
Mount access control devices
at least 6ft (1.8m) beyond gate.
Photo Eye
Edge Sensor
In-ground vehicle loop
detectors
Secure Side
SwingSmart DCS 20 Solar
continuous
Solar-powered
24VDC, 100 cycles/day requires two
10 WATT panels and a minimum of
5 solar hours/day.
½ hp
Two 8Ah (50Ah optional)
Approximately 10 to 15 seconds
Variable speed, open/close
separately
1,300lbs @ 12ft leaf
(590kg @ 4m leaf)
Reflector for
Photo Eye
MX3640-01 REV. D ©2018
Advertisement
Table of Contents
