Proper Grounding And Breather Cap Installation - HySecurity StrongArm 14F Programming And Operations Manual

P G
roPer roundinG and
The gate operator has a vent plug that keeps the hydraulic fluid from spilling during shipment. The vent plug
must be replaced by the breather cap before operating the barrier gate.
NOTICE: Failure to perform the following procedure will cause premature pump shaft failure and void the
Limited Warranty.
1. Remove the vent plug and discard it.
2. Replace the vent plug with the breather cap.
Remove Vent Plug
Replace with Breather Cap
Grade level
MX3657-01 Rev. D ©2020
B
reather
Cut-away view
Consult local
codes for
proper depth
Ground rod
Important Safety Instructions
C i
aP nstallation
Concrete pad
hysecurity.com | 800-321-9947
StrongArm
21