HySecurity SwingSmart DC Series Programming And Operations Manual page 87

Smart DC Terminal
UL 325 - 2016
Emergency Open
(Fire Dept.Open) **
*Do not connect an external control to STOP or OPEN inputs unless controls are located in clear
view of entire gate area.
**Use RADIO OPEN input or RADIO OPTIONS spade connections for all out-of-sight controls, such
as a telephone entry or radio operated controls.
***Fire Department Open control must be keyed or guarded so that it can only be used by
authorized personnel.
87 | www.hysecurity.com
Table 13. SDC Controller Inputs
Smart DC Terminal
pre-2016
Emergency Open
(Fire Dept.Open) **
SWINGSMART DC PROGRAMMING AND OPERATIONS MANUAL
SMART DC CONTROLLER
Wire Connections
N.O. input.
Comonly used for...
The Emergency Open
must be enabled via
the Installer Menu (item
FO). It is energized
by connecting to the
+24V terminal above
it. The EMERG OPEN
overrides photo
eye & edge sensor
commands.
MX3640-01 REV. D ©2018