Installer Menu - HySecurity SwingSmart DC Series Programming And Operations Manual

INSTALLER MENU

The Installer Menu consists of several functions
which can be modified using the Smart DC
Controller buttons or configured through the use
of a laptop computer and the START software
available from the HySecurity website.
The Installer Menu options provide more advanced
configurations for the SwingSmart operator.
Access to the Installer Menu is through the User
Menu. The navigational buttons are the same
in both menu modes. To review how to use the
navigational buttons on the Smart DC Controller,
refer to "Using the Smart DC Controller Buttons
In Menu Mode" on page 54.
NOTICE
To access the User or Installer Menus, the
operator must be in Run Mode with a gate
status showing on the display. The motor
cannot be engaged and the gate cannot be
moving.
To access the Installer Menu, take the following
steps:
NOTICE
The menu items, Usage Class, Gate Handing,
Gate Weight, and Gate Length, as well as
sensor 1, 2, and 3, must be configured before
the operator will function. Refer to "Configuring
the Setup Menu" on page 55.
1. Start at a gate status display. To bypass the
Operator Status Displays, press the MENU
button twice. See Figure 38.
HYSECURITY
GATE CLOSED
CLOSE
OPEN
PREV NEXT
Figure 38. HySecurity Gate Closed
67 | www.hysecurity.com
MENU
STOP RESET
SELECT
SWINGSMART DC PROGRAMMING AND OPERATIONS MANUAL
DISPLAY AND MENU OPTIONS
2. To access the Installer Menu simultaneously
press OPEN and RESET. See Figure 39
OPEN
PREV
Figure 39. Close Timer
NOTICE
The CLOSE TIMER display appears indicating
you have accessed the User Menu.
3. Release the buttons and the Usage Class
display appears indicating entrance to the
Installer Menu. The USAGE CLASS display is
the first item in the Installer Menu. See Figure
40.
OPEN
PREV
Figure 40. Learn Limit
CT 0 (OFF)
CLOSE TIMER
CLOSE STOP MENU RESET
NEXT SELECT
LL 0 (OFF)
LEARN LIMIT
CLOSE STOP MENU RESET
NEXT SELECT
MX3640-01 REV. D ©2018