Table of Contents
Advertisement
TailGate Alert
User Relay 11 is available for notification devices.
If a vehicle is tailgating, and a flasher or audio
device is connected to User Relay 11, the relay
will be triggered by the tailgating vehicle crossing
the loops.
VEHICLE DETECTOR INSTALLATION HY-5B
The Smart DC Controller provides a feature-rich
interface to four different vehicle detector inputs.
NOTICE
Standard box type 11 pin (24 Volt DC or 24 Volt
AC) vehicle detectors may be connected in the
traditional manner as described in Installing
Standard 11-Pin Box Type Vehicle Detectors.
HySecurity's custom HY-5B mini-detector module
(Figure 52) plugs directly into the Smart DC
Controller board making field installation much
faster plus providing a large performance benefit.
The detector communicates with the Smart DC
Controller microprocessor to achieve the following
benefits over common box type detectors:
Terminal Ground: Lightning protection
Optional connection:
Use where lightning strikes occur.
90
| www.hysecurity.com
Metal Pins fit
into controller
board socket
FRONT VIEW
Figure 52. Hy-5B Front and Rear Module
SWINGSMART DC PROGRAMMING AND OPERATIONS MANUAL
VEHICLE DETECTOR
z Loop frequency is automatically set and
monitored by the Smart DC Controller
z Very low power draw, which is important for
maximum UPS capability during a power failure
and for solar applications.
z Cross-talk between multiple loops is impossible.
z Best operating frequency for each loop is
automatically selected.
z Loop frequency and call strength can be
reported on the Smart DC Controller display.
z Loop malfunctions are reported and stored by
the Smart DC Controller.
z Most detector or loop faults that can occur
are reported and presented on the Smart DC
Controller display.
It is not mandatory to use two separate detectors
for inner and outer obstruction detection, but the
benefits inusing an additional detector provide
second vehicle tailgating detection, loitering alert,
and selectable nonreversing options.
LED
Vehicle Loop
features and
functions
explained
on front label
STANDOFF SUPPORTS
(INSERT INTO THE HOLES
IN THE CONTROL BOX)
REAR VIEW
MX3640-01 REV. D ©2018
Advertisement
Table of Contents
