Attaching The Stub Arms - HySecurity SwingSmart DC Series Programming And Operations Manual

ATTACHING THE STUB ARMS

1. Attach the swivel eye bolt to the gate bracket
using the fasteners provided.
2. Remove the fasteners from the taper clamp
assembly.
1
30 | www.hysecurity.com
3. Align the stub arm and secure it to the taper
4. Pull the taper handle to lengthen it. Adjust the
Stub arm
Figure 7. Attaching Stub Arms
SWINGSMART DC PROGRAMMING AND OPERATIONS MANUAL
INSTALLATION
clamp assembly using the fasteners removed
in step 2.
handle so the ball detent fits into its cutout and
secures the handle length. Turn the handle
counterclockwise to loosen the taper clamp.
Figure 7.
Taper handle
2
3
4
MX3640-01 REV. D ©2018