ADJUSTING THE DISPLAY CONTRAST
The display contrast can be adjusted from 1 to 9
to increase visibility and ease of use. It is set at the
factory to level 5. The text becomes darker as you
go up the scale.
NOTICE
If extremely low temperatures are expected,
set the contrast to a higher number.
To adjust the contrast (1 to 9), take the following
steps and see Figure 37:
1. At a gate status display, press the MENU
button twice. This accesses the User Menu and
the CLOSE TIMER display appears.
2. Press NEXT until the LCD CONTRAST display
appears.
3. Use the SELECT and NEXT buttons to navigate
and change the number on the display.
4. To exit the User Menu, press the MENU
button. A gate status appears in the display
indicating you have returned to Run Mode.
LD 5
LCD CONTRAST
OPEN
CLOSE
PREV
NEXT
Figure 37. LCD Contrast
62
| www.hysecurity.com
STOP
MENU
RESET
SELECT
SWINGSMART DC PROGRAMMING AND OPERATIONS MANUAL
DISPLAY AND MENU OPTIONS
MX3640-01 REV. D ©2018