Run Mode; Viewing Operator Status Displays - HySecurity SwingSmart DC Series Programming And Operations Manual

RUN MODE

The Run Mode displays appear static when the
operator is ready and waiting for a run command.
When the display is flashing "GATE OPENING"
or "GATE CLOSING", a command has been
received and the gate is in motion. The command
may come from a variety of sources: a card reader,
push-button remote, or recognition of a vehicle
passing over a loop detector. In all cases, the
operator "runs" the motor when it receives an
operational command.
NOTICE
To access the User or Installer menus, the
motor cannot be engaged and the gate cannot
be moving.
Three displays indicate the position or status of the
gate. The keypad entry used to access the User or
Installer menus, begins at one of these Run Mode
displays. See Figure 32.
HYSECURITY
GATE OPEN
OPEN CLOSE
PREV NEXT
Pressing Open, Close, or Stop causes the
gate to perform the command.
HYSECURITY
GATE CLOSED
OPEN CLOSE
PREV NEXT
Pressing Reset clears alerts or faults and
returns to Run Mode.
NOTE: Press Reset at any Run mode
status display to view the software version.
For example: h5.57
HYSECURITY
GATE STOPPED
OPEN CLOSE
PREV NEXT
Pressing Menu scrolls through operator
status displays and accesses the User Menu.
Note: Pressing the MENU button twice,
bypasses the operator status displays.
Figure 32. Run Mode Displays
56 | www.hysecurity.com
STOP MENU RESET
SELECT
STOP MENU RESET
SELECT
STOP MENU RESET
SELECT
SWINGSMART DC PROGRAMMING AND OPERATIONS MANUAL
DISPLAY AND MENU OPTIONS

VIEWING OPERATOR STATUS DISPLAYS

Press the MENU button once and the operator
status displays appear in two second intervals.
Pertinent information appears to provide a quick
overview of the operator's status or configurations.
See Figure 33.The type of information that may
scroll across the display includes: software version,
operator type (OT), gate handing (LEFT HAND
or RIGHT HAND), buss voltage, and life cycle
counter.
OPEN
PREV
OPEN
PREV
OPEN
PREV
Figure 33. Example of Operator Status Displays
BUILD YEAR
POST - 2016
CLOSE MENU
STOP RESET
NEXT SELECT
LEFT HAND
CLOSE STOP MENU RESET
NEXT SELECT
BULK
CHARGER STATE
CLOSE STOP MENU RESET
NEXT SELECT
MX3640-01 REV. D ©2018