Display And Menu Options - HySecurity SwingSmart DC Series Programming And Operations Manual

Pad-mounted electromechanical swing gate operator with smart dc controller

Table of Contents

When you first apply power to the operator, it is

locked in Menu mode and prompts appear on the

display. The gate will not move and the controls

will not function until the prompts have been

answered. The prompts include:

z Usage Class setting

z Gate Handing

z Three external entrapment protection SENSOR

assignments

Once you've completed the installation of the

SwingSmart operator and attached the wired

accessories, you're ready to program the operator.

Two different approaches exist:

z Connect a laptop computer to the USB or serial

(RS-232) port and upload the gate settings and

set the operator menu configurations via the

S.T.A.R.T. software.

NOTICE

Use a laptop computer at your place of

business to conveniently download the free

S.T.A.R.T. software from www.hysecurity.com

before heading out into the field. A S.T.A.R.T.

User Guide is also available online.

z Manually navigate through the User and Installer

Menus using the buttons located on the Smart

DC Controller.

If you are unsure of the usage classification, refer

to page 17. It explains the different usage site

classifications for UL 325.

CAUTION

Smart DC Controller can be powered when

either switch is turned on. The operator is a

DC-powered unit and runs on its batteries.

If DC power switch is off, operator will not

function (even though AC power switch is on).

When the operator is connected to AC power

and the unit is turned on, the charge level of

the battery is being monitored and maintained.

On a solar-powered operator, the AC power

switch connects and disconnects the DC power

from the solar panels.

| www.hysecurity.com