HySecurity SwingSmart DC Series Programming And Operations Manual page 13

Pad-mounted electromechanical swing gate operator with smart dc controller
Table of Contents

Advertisement

 Test gate operator monthly. Specifi cally, test
Inherent Entrapment Sensor (IES) and external
entrapment protection sensors. Gate must
reverse its direction of travel upon contact
with a rigid object and/or stop when an object
activates non-contact sensors. After adjusting
force or travel limit, retest gate operator. Failure
to adjust and test gate operator on a regularly
maintained schedule can increase risk of injury
or death.
 Have a professional gate installer routinely test
entire gate operator and entrapment protection
sensors. Have a qualifi ed service person make
repairs to gate hardware to keep gate running
smoothly.
GENERAL SAFETY
 NEVER operate this equipment without proper
protective clothing and other protective devices
required by the job or city and state regulations.
 NEVER operate this equipment
when not feeling well due to fatigue,
illness or when under medication.
 NEVER operate this equipment under the
infl uence of drugs or alcohol.
 DO NOT use the equipment for any purpose
other than its intended purposes or applications.
 This equipment should only be operated by
trained and qualifi ed personnel 18 years of age
and older.
 Whenever necessary, replace nameplate,
operation and safety decals when they become
diffi cult read.
13
| www.hysecurity.com
 Manufacturer does not assume responsibility for
 NEVER use accessories or attachments that are
 ALWAYS know the location of the
 ALWAYS know the location of the
 ALWAYS know the location of the
 NEVER disconnect any emergency or safety
 NEVER lubricate components or attempt
 ALWAYS keep the machine in proper running
 Fix damage to machine and replace any broken
 ALWAYS store equipment properly when it is
SWINGSMART DC PROGRAMMING AND OPERATIONS MANUAL
SAFETY INFORMATION
any accident due to equipment modifi cations.
Unauthorized equipment modifi cation will void
all warranties.
not recommended by HySecurity for this
equipment. Damage to the equipment and/or
injury to user may result.
nearest fi re extinguisher.
nearest fi rst aid kit.
nearest phone or keep a phone on the job site.
Also, know the phone numbers of the nearest
ambulance, doctor and fi re department. This
information will be invaluable in the case of an
emergency.
devices. These devices are intended for
operator safety. Disconnection of these devices
can cause severe injury, bodily harm or even
death. Disconnection of any of these devices
will void all warranties.
service on a running machine.
condition.
parts immediately.
not being used. Equipment should be stored in
a clean, dry location out of the reach of children
and unauthorized personnel.
MX3640-01 REV. D ©2018

Advertisement

Table of Contents
loading

This manual is also suitable for:

Swingsmart dcs20Swingsmart dc20

Table of Contents