Table of Contents
Advertisement
SECTION 2: INSTALLATION SAFETY
• The gate operator installation is NOT a "do-it-yourself" project. Contract a qualified gate operator instal-
lation company to install this system to ensure a safe and reliable installation.
• It is the responsibility of the property owner to ensure the installer is qualified to carry out the installation
in a safe and professional manner.
• Consult local government agencies for up-to-date rules and regulations to satisfy licensing, codes or
regulations that regulate automated gate system design and installation.
• The gate for which the gate operator is intended to be used should itself be installed correctly so that it
is level and plumb and the gate opens easily and evenly.
• Note that Nice swing gate systems are not intended for installation on an incline.
WARNING!
READ ALL SAFETY INFORMATION IN THE CONTROL BOX INSTALLATION MANUAL WHEN
INSTALLING A SWING GATE SYSTEM!
BE AWARE OF ALL MOVING PARTS AND AVOID CLOSE PROXIMITY TO ANY PINCH POINTS.
SECTION 3: TOOLS NEEDED FOR INSTALLATION
Below is a list of tools suggested for installation of the 3501 actuator:
•
Welder (option for gate bracket)
•
Drill and assorted bit sizes
•
1/2" and 3/8" wrench and/or nut driver
•
Basic hand tools (screwdrivers, pliers, etc..)
•
Bubble Level (for leveling actuator)
•
Measuring tape (for locating post position)
•
1/8" and 5/32" hex keys (for set screws)
4
www.hysecurity.com • 800-321-9947
3501 Actuator
INSTALLATION REFERENCE MANUAL
IMPORTANT!
MX4754 Rev. B ©2019
Advertisement
Table of Contents
