DISPLAY AND MENU OPTIONS
Table 11. Smart DC Controller - User Menu Functions
Setting Options
Associated
User Menu
(Bold = Factory
Menu Tasks and Explanations
DC Controller
Display
Settings)
Connections
Table Notes:
The following conditions apply to the indicated reference-numbered menu selections:
Table Note 1:
For gate operators using Type D entrapment protection, an automatic closing device (such as a
timer, loop sensor, or similiar device) shall not be employed.
Table Note 2:
WARNING: Do NOT cut the wires to the buzzer or unplug it as the operator will not be in
compliance with UL 325. Failure to comply may result in serious injury or death.
66
| www.hysecurity.com
SWINGSMART DC PROGRAMMING AND OPERATIONS MANUAL
MX3640-01 REV. D ©2018