Download
Share
Print this page
HySecurity SlideSmart DC Quick Start Steps
  1. Manuals
  2. Brands
  3. HySecurity Manuals
  4. Gate Opener
  5. SlideSmart DC
  6. Quick start steps

HySecurity SlideSmart DC Quick Start Steps

Hide thumbs Also See for SlideSmart DC:
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
Q
S
S
Uick
tart
tepS
Keyed latch
Cover
Plastic base
U
Operator
npack
O
the
peratOr

Advertisement

loading
Need help?

Need help?

Do you have a question about the SlideSmart DC and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for HySecurity SlideSmart DC

Summary of Contents for HySecurity SlideSmart DC

  • Page 1 Uick tart tepS Keyed latch Cover Plastic base Operator npack peratOr...
  • Page 2 Follow facility Lock Out / Tag Out procedures. Make sure both the refer to the SlideSmart DC Installation and Reference Manual. DC and AC power switches on the Control Box are in the OFF position. Refer to step 8.
  • Page 3 National Electric Code (NEC) requires a separate earth ground in addition to the required equipment ground. A local earth Grounding rod depth at ground also serves to protect the electronic controls. 10ft (3m) or per local code Page 3 www.hysecurity.com SlideSmart DC Quick Start Steps D0349 Rev D...
  • Page 4 Ideal distance = 3¼" 6. Adjust the nuts on the eye bolt to (8.3cm) tighten the chain and minimize sag. NOTE: For rear or post mounted installations, see SlideSmart DC Installation and Reference Manual. Too close to gate INCORRECT CORRECT...

  • Page 5: Setup Menu

    Press STOP twice to preserve the open See page 6, Install the Target Magnet. stop location in memory. Page 5 www.hysecurity.com SlideSmart DC Quick Start Steps D0349 Rev D...
  • Page 6 When the target magnet passes the target sensor, limits are automatically restored. If LEARN OPEN appears on the display, the limits need to be re-established. Return to step 6 on page 5. Page 6 D0349 Rev D SlideSmart DC Quick Start Steps www.hysecurity.com...

  • Page 7: T Urn Power Off

    Wiring of gate operators must conform to NEC CAUTION 230V position or damage to the operator will occur standards and comply with all local codes. and void the Limited Warranty. Page 7 www.hysecurity.com SlideSmart DC Quick Start Steps D0349 Rev D...
  • Page 8 Other devices may require more connections or configurations. For example, the Fire Department (EMERG OPEN) input requires a +24-volt input. The connection must be activated by changing the settings through the Installer Menu. Refer to the SlideSmart DC Installation and Reference Manual. COMMON...