Safety Information - HySecurity SwingSmart DC Series Programming And Operations Manual

Hazards, associated with automatic gates, can be
reduced with proper site design, installation, and
use. Installers, maintenance crews, and
owners/users must read and follow the
s a f e t y r e q u i r e m e n t s f o u n d i n
HySecurity product manuals.
®
Consult local government agencies for up-to-date
rules and regulations as certain municipalities
have established licensing, codes or regulations
that regulate automated gate system design and
installation.
SAFETY MESSAGES
The four safety messages shown below will inform
you about potential hazards that could injure you
or others. Safety messages specifi cally address
level of exposure to operator and are preceded
by one of four words: DANGER, WARNING,
CAUTION or NOTICE.
SAFETY SYMBOLS
DANGER
Indicates a hazardous situation which, if not
avoided, WILL result in DEATH or SERIOUS
INJURY.
WARNING
Indicates a hazardous situation which, if not
avoided, COULD result in DEATH or SERIOUS
INJURY.
CAUTION
Indicates a hazardous situation which, if
not avoided, COULD result in MINOR or
MODERATE INJURY.
NOTICE
Addresses practices not related to personal
injury. Indicates damage to equipment is
probable if the hazardous situation is not
avoided.
9 | www.hysecurity.com
COMMON INDUSTRIAL SYMBOLS
The following international safety symbols may
appear on product or in its literature. The symbols
are used to alert you to potential personal injury
hazards. Obey all safety messages that follow
these symbols to avoid possible injury or death.
SWINGSMART DC PROGRAMMING AND OPERATIONS MANUAL

SAFETY INFORMATION

Symbol
Entrapment Zone
Possible Pinch Point
Safety Hazard
Attention -
Take Notice
Danger -
Keep Away
MX3640-01 REV. D ©2018