Ordering data
11.4 Accessories
11.4.4
Cabinet bushing via mounting flange
Mounting accessories for connection system
Accessories
Mounting flange as cabinet
bushing (with installation in‐
structions)
Packing unit: 1 item
The mounting flange is installed on the external wall of the control cabinet. It ensures the
degree of protection of the control cabinet.
● Install the mounting flange as specified in the enclosed installation instructions.
11.4.5
Degree of protection kit IP65 for the motor
Shaft sealing ring - IP65 degree of protection kit for the motor
The shaft sealing ring can be used as spare part or for retrofitting.
Note
You can order a motor with shaft sealing ring (degree of protection IP65) directly.
Additional information about ordering degree of protection IP65 can be found in Chapter:
The motor satisfies degree of protection IP65 when the shaft sealing ring is installed.
220
"Ordering data of the motor (Page 215)"
Motor article number
1FK2☐02
1FK2☐03
1FK2☐04
Diagram
For con‐
nector size
M12
M17
Figure of the shaft sealing ring
For motor
Article number
1FK2☐02
6FX2003-7JX00
1FK2☐03
1FK2☐04
6FX2003-7HX00
Article number of the degree of pro‐
tection kit
1FK2902-0GC00
1FK2903-0GC00
1FK2904-0GC00
SINAMICS S210 servo drive system
Operating Instructions, 12/2017, A5E41702836B AA