Changing The Safety Password; Resetting The Safety Password; Safety Password - Siemens SINAMICS S210 Operating Instructions Manual

4. If you click "OK", the converter imports the safety password.
Remember the password or store the password in a safe place that cannot be accessed
by unauthorized persons.
You are prompted to enter a password each time safety commissioning is started.
Figure 6-27
You must enter the safety password in this input field so that you can continue with the
other safety settings.
5. Click

Changing the safety password

1. Click "Change safety password ...".
The input dialog opens.
2. Enter the current safety password in the first field.
3. Enter the new safety password in the second field.
4. Repeat the input in the "Confirm new safety password" field.
5. Click "OK" to confirm the input of the password.
6. Click

Resetting the safety password

1. Click "Reset safety password ...".
The input dialog opens.
2. Enter the current safety password.
3. Click "OK" to confirm the resetting of the password.
The drive then outputs an alarm that password protection is no longer active.
4. Click
SINAMICS S210 servo drive system
Operating Instructions, 12/2017, A5E41702836B AA

Safety password

to save the data permanently.
to save the data permanently.
to save the data permanently.
Commissioning and diagnostics in the Web server
6.8 Safety settings
147