Screen Displays - Omron Z500 Operation Manual

SECTION 2
Basic Operations

2-2-2 Screen Displays

The Z500 is operated by selecting functions displayed on the screen. Familiarize yourself with each
function before operating the Z500.
Scene Number
There are 16 scenes.
Setting different measurement
conditions for each one allows
easy switching between different
setups.
Cursor Keys
The cursor is moved to the
desired function by pressing
the Up, Down, Left,
and Right Keys.
Z500
24
Operation Manual
Scn 0 Run
S+ / :Display S+ENT:Adjust
Key Operations
Displays special key combinations at the bottom of the screen
where available. S refers to the SHIFT Key. "S + ENT" indicates
that the ENT Key should be pressed while the SHIFT Key is pressed.
Mode
Display
Set Mode to set the inspection conditions.
Performs measurement.
Run The measurement results are output to an external device via terminal
block or RS-233C.
Tools Used to save settings and images to a computer as backup.
Used to set system conditions for the Z500. Select this mode to switch
System
menus and settings for communications with external devices.
Used to save data to flash memory in the Z500.
Save If new settings have been made, be sure to save the data before quit-
ting.
Mode (See the table below)
The current operating mode is displayed.
9.96ms
Measurement period (Sampling time)
It varies depending on the item
to be measured.
Description