SECTION 6
System Settings
A setting screen will be displayed.
4.
An optimum correction value will be set and the screen in (1.) will return.
Clearing the Value for Installation Error Correction
1.
2.
A confirmation message will be displayed.
3.
The correction value will be cleared and the screen in (1.) will return.
Z500
150
Operation Manual
Press the ENT Key.
Only the correction values for the sensor that has currently been used for the
measurement (Sensor 0 or Sensor 1) and for the measurement method (Wide
or Zoom) will be cleared.
Enter System Mode and select Slant
correct.
Select Clear.
Select Execute.
Scn 0
System
Comm
Environment
Download
Setting
Slant correct
Clear
Initialize
Ve rs io n
Clear the slant data?
Execute
Cancel