Omron Z500 Operation Manual page 133

When selecting # times
1.
Enter Tools Mode.
Refer to page 128.
The selections will be displayed.
2.
Select Test.
The test measurement screen will be displayed.
3.
Position the workpiece to be tested and
press the ENT Key.
A menu for selecting test methods will be displayed.
4.
Set Test mode to # times.
5.
Make the required setting for # of
samples and select End.
REFERENCE
SECTION 5
Other Functions
Scn 0 Tools
Test
Surrounding image
Backup
Scn 0 Tools
OUT0
-----------mm [STOP]
No. AVE MAX-MIN
NUM
1
2
3
4
5
Scn 0 Tools
OUT0
-----------mm [STOP]
No. AVE MAX-MIN
NUM
1
Test mode
:
# times
2
# of samples
:
[ 100]
3
4 End
5
Operation Manual
Z500
131