Step 5 Measurement Conditions - Omron Z500 Operation Manual

SECTION 4
Menus for Expert Menu
5
Measurement Conditions
Step
Set the measurement conditions. The following can be set in Conditions and its lower hierarchies.
Perform the setting as required.
Averaging number
• The Relationship between the Measurement Response Time and the Resolution
CHECK
1.
Z500
88
Operation Manual
Menu
The average of the setting number of times is output as
# to avg the measurement result. Set this function to disregard
sudden changes in the waveform.
From the measurement results that have been obtained
Trigger within a specified measurement period, the specified
characteristic quantity is held and output.
Removing noises, outputting measurement failure, and
Details
other miscellaneous methods can be set in more detail.
Use this function to disregard sudden changes in the waveform. The average of
the setting number of times is output as the measurement result.
Selection 1, 2, 4, 8*, 16, 32, 64, 128, 256
Measurement
Averaging
response time
number
Short
1
256 Long
The setting can be performed through the adjustment menu.
REFERENCE
Refer to page 28.
Select Conditions.
Description
The asterisk (*) indicates the default setting.
Resolution
Low
High
Scn 0
Image
Compensatn
Meas set
Conditions
Output
Reference
Page 88.
Page 90.
Page 96.
Set