SECTION 5
Other Functions
5-8-2 Loading Scene Data from a Computer
1.
2.
3.
4.
5.
6.
The selections will be displayed.
7.
Z500
140
Operation Manual
In the example provided below, the procedure for loading the scene data onto
Scn2 is explained.
Z500
Z500
Perform the same operations as those described in (1.) to (3.) in the procedure
for 5-8-1 Saving Scene Data to a Computer.
REFERENCE
Refer to page 136.
Select Transfer/Send File from the Hyper Terminal menu on the computer.
Select the file to be loaded.
Set the protocol to Xmodem.
Select Send.
The data transfer screen will be displayed.
Once the preparations have been completed on the computer, enter Tools
Mode.
REFERENCE
Refer to page 128.
Select Backup.
Data
Computer
Scn 0
Tools
Test
Surrounding image
Backup