Changing Modes
The procedure for changing the setting from Thru to Trig is explained below.
1.
Display the Trend Monitor and enter View Mode.
Refer to page 112.
The selections will be displayed.
2.
Move the cursor to Thru
ENT Key.
The selections will be displayed.
3.
Select Trig.
The setting will be registered and the screen in (2.) will return.
Press the ESC Key to display the Trend Monitor.
REFERENCE
and press the
SECTION 5
Other Functions
Scn 0
View
Thru
Vert
Horiz
Thru
Trig
Operation Manual
Z500
119