Operational Flow - Omron Z500 Operation Manual

SECTION 1
Features

1-2 Operational Flow

1-2-1 Menus for Conversational Menu
Displaying Images on the Monitor
Refer to page 20, 2-1
Starting the Z500 and Displaying Images.
Refer to this section to learn about the basic
operational flow from setting measurement
conditions to executing measurements.
CHECK
Starting Up Conversational Menu and
Entering Set Mode
Refer to page 40, See
Step 1 : Starting Conversational Menus.
Setting Basic Measurement Conditions
Refer to page 41, See
Step 2 : Setting Basic Measurement Conditions.
Selecting and Setting Measurement Items
Refer to page 48, See
Step 3 : Setting Measurement Contents.
Refer to page 70 for details.
Setting Measurement Conditions (if necessary)
Refer to page 49, See
Step 4 : Setting Measurement Conditions.
Refer to page 88 for details.
Setting Output Contents
Refer to page 50, See
Step 5 : Setting Output Contents.
Refer to page 100 for details.
Starting Measurements
Refer to page 51, See
Step 6 : Starting Measurements.
Performing Test
Refer to page 129, 5-6
Testing Measurement Performance (Test).
Z500
14
Operation Manual
Turn ON the power.
Refer to page 39 for information on
settings using Conversational Menu.
Screen Types and Display Methods
Refer to page 29.
Selecting Measurement Item
Appropriate to the
Measurement Goal
Refer to page 70.
Height
Step: 2 pts
Step: 3 pts
Edge position
Width
Edge center
Define
Checking the Line Beam Position
Refer to page 135, 5-7Checking the Line
Beam Position (Surrounding image).