Step 2 Adjusting Images - Omron Z500 Operation Manual

SECTION 4
Menus for Expert Menu
2
Adjusting Images
Step
To facilitate accurate measurements, images are adjusted for clearer display of the section to be
measured.
Measurement Methods
CHECK
Measurement Range
CHECK
Z500
56
Operation Manual
Specify the region to be measured.
Select Zoom to assure higher position measurement accuracy.
Normally, use with the default setting (Wide).
Selection
Measures the whole measurement range of the connected
Wide*
sensor.
Enlarges and measures a part of the measurement range of the
connected sensor.
Zoom
Select this function to assure higher position measurement
accuracy.
When the measurement method is changed, all settings for scene data wil be cleared.
Example: Z500-SW17
Wide
+20mm
0mm
-20mm
14.5mm
( 7.25mm)
17.3mm
( 8.65mm)
20.1mm
( 10.05mm)
The measurement range varies depending on the Sensor models connected.
REFERENCE
Refer to page 28 in the Setup Manual.
Description
The asterisk (*) indicates the default setting.
Zoom
+20mm
0mm
-20mm
4.8mm
5.7mm
6.7mm
This range is enlarged three
times and displayed on the
monitor screen.