Entering Display Mode - Omron Z500 Operation Manual

SECTION 5
Other Functions
5-2 Entering View Mode
Change the contents displayed on the screen in View Mode.
Enter View Mode through the adjustment menu. To enter the View Mode, display the screen of the
content to be changed.
In the example provided below, the procedure for entering View Mode through the Image Monitor is
explained.
1.
The adjustment menu will be displayed.
2.
A screen in View Mode will be displayed.
CHECK
Z500
112
Operation Manual
Display the Image Monitor and press the
SHIFT + ENT Keys.
Press the TRIG Key.
The selections displayed vary depending
on the type of screen when entering
View Mode.
Scn 0 Run
NEAR
BRIGHT
DARK
Zero's OFF
OUT 0
+0005.18800
mm
S+ / :Display S+ENT:Adjust
Scn 0 Run
ESC TRG ENT
Display
Test
Sensitvy
Output Meas set
Conditns
ESC:Back S+ / :Switch display
Scn 0 View
Enlarge
Reset
Move cursr
9.96ms
FAR
Sen0
[ 15]
LV
[ 170]
PEAK
Sen1
[ .]
LV
[ ]
PEAK
PASS
9.96ms