Omron Z500 Operation Manual page 132

SECTION 5
Other Functions
Output number
The output number being tested is displayed.
Press the Up and Down Keys to change the number.
Measurement results
Scn 0
OUT0
-0004.03975mm
No.
NUM
1 100
2 100
3
4
5
Test results
The most recent test results are displayed in reverse video.
After the 5th measurement, the previous results
are overwritten in order starting from 1.
CHECK
Z500
130
Operation Manual
Measurement status
During measurement, [RUN] flashes.
Tools
[ STOP ]
AVE MAX-MIN
-0004.05122 +0000.01821
-0004.05122 +0000.01821
Item
Displays the number of measurements performed during the test
NUM
measurement period.
Displays the average measurement value for the test measurement
AVE
period.
Displays the maximum and minimum measurement values for the test
MAX-MIN
measurement period.
Displays the maximum measurement value for the test measurement
MAX
period.
Displays the minimum measurement value for the test measurement
MIN
period.
Up to 5 sets of measurement results can be displayed in list format. This feature is useful
for the following.
• Comparing measurements for different items
• Comparing the still state and moving state
• Evaluating repeat accuracy
Scn 0
OUT0 -0004.03975mm
No.
NUM
1
2
3
Switch display items
4
5
Description
Tools
[STOP]
MAX MIN
100 -0004.03948 +0004.05770
100 -0004.03948 +0004.05770