Omron Z500 Operation Manual page 69

The ending-line setting screen will be displayed.
5.
Specify the ending line of the reference
height region.
The characteristic quantity setting screen will be displayed.
6.
Select a characteristic quantity that can
be used as the measurement point of
the reference height.
The cross cursor of the measurement
point will move in response to the
selections.
Select the item while monitoring the image.
In this example, select Average.
The setting screen for reference position will be displayed.
7.
Specify the edge level to be used for the
reference position.
Use the Left and Right Keys to move
the cursor.
(Use these keys together with the SHIFT
Key to move the cursor quickly.)
SECTION 4
Menus for Expert Menu
Cursor
Average
Peak
Bottom
Cursor
Cursor
Operation Manual
Z500
67