1.
Select Image/Meas Method.
The measurement method selections will be displayed.
The selections for the sensors to be used for
Two Sensor
measurement will be displayed.
Select the Sensor number.
Go to (2.).
2.
Select the measurement method while
monitoring the image to be adjusted.
3.
Press the ENT Key.
The setting will be registered and the screen in (1.) will return.
SECTION 4
Menus for Expert Menu
Scn 0
Set
Image
Meas method
Compensatn
Region
Meas set
Sensitivity
Conditions
Details
Output
Scn 0
Set
Wide
Zoom
Operation Manual
Z500
57