Omron Z500 Operation Manual page 71

#2
Set the Compensation Method
Select the position compensation method.
Unless Reference has been set, the compensation method selections will not be
CHECK
displayed.
1.
Move the cursor to None
the ENT Key.
The selection for compensation method will be displayed.
2.
Select the compensation method.
In this example, select Height&Pos.
The setting will be registered and the screen in (1.) will return.
.
None*
Height
Height
Position
Height&Pos
Position
Selection
No compensation is required.
Compensate the height.
Compensate the position.
Compensate both the height and position.
The asterisk (*) indicates the default setting.
and press
Scn 0
Image
Compensatn
Meas set
Conditions
Output
SECTION 4
Menus for Expert Menu
Description
Set
None
Reference
None
Height
Position
Height&Pos
Z500
Operation Manual
69