2
Setting Basic Measurement Conditions
Step
Basic settings required for measurement are described below.
#1
Select the Measurement Method
Specify the region to be measured.
Select Zoom to assure higher position measurement accuracy.
Normally, use with the default setting (Wide).
#1
Page 41
Select the Measurement
Method
Selection
Measures the whole measurement range of the connected
Wide*
sensor.
Enlarges and measures a part of the measurement range of the
connected sensor.
Zoom
Select this function to assure higher position measurement
accuracy.
Menus for Conversational Menu
#2
Page 43
Set the Measurement
Region
Description
The asterisk (*) indicates the default setting.
SECTION 3
#3
Page 44
Select the Sensitivity
Adjustment Method
Z500
Operation Manual6
41