SECTION 4
Menus for Expert Menu
Changing Measurement Contents
CHECK
1.
The selections will be displayed.
2.
The setting screen for measurement range will be displayed.
The remaining procedures are the same as those for measurement item setting.
Z500
86
Operation Manual
Change the measurement contents that have been set for the output number.
To change measurement items, clear the existing measurement items and then
set new items.
REFERENCE
Refer to page 87.
Move the cursor to the output number to
be changed the output conditions and
press the ENT Key.
Select Change.
Scn 0
Set
OUT0:Height
OUT1:Step: 2 pts
OUT2:Edge position
OUT3:
OUT4:
OUT5:
OUT6:
OUT7:
Scn 0
Set
Change
Calibrate
Output
Delete